JOB VACANCY AKER SOLUTIONS LAGI

Interested candidates please send resume to nisam867@gmail.com.

QUALITY MANAGEMENT DEPARTMENT

OPENING 1

QUALITY SURVEILLANCE ENGINEER

Responsibilities:

• Perform quality surveillance at supplier sites in accordance to product specifications/procedures
• Review supplier ITP to ensure that they are in accordance to project requirements
• Work with supplier to buy off and release materials for delivery
• Monitor supplier performance to ensure material and workmanship quality is met
• Follow up and develop supplier to meet quality expectations
• Participate in new supplier qualification to evaluate their process and technical capabilities

Requirements:

• Engineering degree with at least 2 years experience in QA/QC function and vendor Quality Assurance role
• Diploma holder with at least 5 years of relevant work experience is also considered
• Candidate must have experience in welding and NDT quality, and must posses the relevant certificates  (CSWIP, PCN, etc)
• Good writing and communication skill

 QUALITY ENGINEER

Responsibilities:

§ Perform internal and supplier audits, including ad hoc audits to investigate quality issues so that root causes are identified and corrective and preventive measures are put in place

§ Liaise with Customer and Third Party QA representatives in pursuance of and compliance with contractual obligations

§ Coordinate improvement actions for process, supplier and customer audits findings and close NCR upon verification of effectiveness and completeness

§ Work with project managers/engineers to resolve process quality issues

§ Provide guidance and quality awareness training to all managers, supervisors and other staff   

§ Develop, maintain and revise as required, processes and procedures relating to Quality Assurance core capabilities

§ Provide periodic reports on product performance indicators and trends

§ Maintain a Technical Library of engineering standards and codes of practice

Requirements:

• Degree in Engineering, preferably Mechanical Engineering
• Formal training on the ISO 9001 Standard and trained in ISO9001 audits
• Minimum 2 years experience in a manufacturing QA environment
• Excellent report writing skill is required for this position
•  Good audit and presentation skills is compulsory

 OPENING 2

ADMIN ASSISTANT

Responsibilities:

• Handling of all documentation and document flows on a project in accordance with established working routines and project procedures
• This include engineering, supplier, customer provided and manufacturing documents
• Carrying out other documentation tasks as directed by Department Manager

• Governing documents and directions given by Department Manager, Department Project Coordinator or Senior Document Controller.

• Control and carry out work related to documentation workflows on projects
• Ensure that Aker Solutions quality control system is implemented and followed on projects
• Maintenance of project archives when necessary

• Cooperate with Department Manager, Department Project Coordinator and Senior Document Controller and other parties involved in the work related to Document Management in order to ensure that routines and procedures are met according to project as well as internal requirements
• Comply to HSE requirements.

Requirements:

• Familiar with standard Microsoft tools; Outlook, Excel, Word. Preferably good knowledge with the SAP system, or other related PLM system.

 OPENING 3

WELDING ENGINEER

Responsibilities:

·         Develop welding techniques, procedures, and application of welding equipment to problems involving fabrication of metals (carbon steels, stainless steels, alloy steels, etc)

o   improve existing or develop new welding equipment, develop new or modify current welding methods, techniques, and procedures,

·         Establishes welding procedures to guide production and welding personnel relating to specification restrictions, material processes, pre-and post-heating requirements which involve use of complex alloys, unusual fabrication methods, welding of critical joints, and complex post heating requirements.

o   Prepare and review WPS, PQR, WPQ, Procedures and Quality Plan as per Specifications & Codes

o   Conduct procedure qualification (PQR) test as per welding procedure specification (WPS)

o   Organize and conduct welders  qualification test as per welding codes and client specifications

·         Coordinates technical personnel in performing inspections to ensure workers' compliance with established welding procedures, restrictions, and standards; in testing welds for conformance with national code requirements; or testing welding personnel for certification.

o   Perform random inspection on electrodes, filler wires and gas used for welding

o   Verify that control and storage of welding consumables and documents are in order

o   Review the performance of quality control systems established for QC, NDT inspectors and welders by

§  Carrying out random visual inspection of pipe fit up and weld joints and reject/accept as per acceptance criteria of technical specifications

§  Performing random visual inspection of structural members fit up and weld joints as per acceptance criteria

§  Performing random monitoring of  preheating prior to commencement of welding, and interpass temperatures during welding

§  Random check on non destructive examination of welds(RT/UT/MT/PT), pressure tests in accordance with approved procedures and QC plans

§  Random QC check on Post weld heat treatment of welds, heating rate, soaking time and cooling rate during heat treatment

·         Monitor performance of welders

o    On the basis of RT/UT/MT/PT inspection results and promote corrective action where necessary

o   Monitor all welders performance including the sub-contractors and their rates of rejection of each welder as per the codes and standards

·         Prepares technical reports as result of research and development and preventive maintenance investigations.

·         Contacts personnel of other agencies, engineering personnel, or clients to exchange ideas, information, or offer technical advice concerning welding matters.

o   Liaise with client, authorized Inspector and third party on welding matters

o   Coordinate technical queries with project management team

·         Comply to all HSE requirements including verifying that all safety precautions are uphold during welding and NDT works

 QUALIFICATION, EXPERIENCE AND ABILITIES

• Qualified to Degree level or equivalent in Metallurgy, Welding Technology; Mechanical or Materials Science.
• Certified welding inspector
• Experienced in NDT techniques (UT, RT, PT, MT)
• Sound Knowledge in various welding process and welding equipment
• Ability to demonstrate a thorough working knowledge and experience with industry and standards, and codes such as ANSI B 31.3, ASME Section V and IX, AWS D1.1, API series for XMT, wellheads, risers such as API 6A, 17D, 16A, 16C, 16F, 16R, 5L, etc.
• At least six (6) years relevant experience in an engineering background.
• A good communicator and have good presentational skills.

 SUBSEA LIFECYCLE SERVICES

OPENING 1

SLS business unit supervisor

Responsibilities:

• Reports daily to the VP APAC Region for all duties, in his/her absence to the VP Sale and Marketing
• Comply with all Aker Solutions HSE regulations & procedures
• Responsible for daily management of the SLS sales activities, but not limited to;

-          Focal point for sales enquiries and ITT’s for spares and other associated SLS services

-          Liaison with Sales and Marketing for tender activities and pricing

-          Preparation of sales and spares quotes as received

-          Liaison with Finance Department on margins and invoicing

-          Liaise with Logistics regarding shipping and freight costs

-          Liaise with Logistics in relation to shipping activities and expedite as required

-          Supervise the input of sales orders into SAP

• Coordinate with Rental Tool Pool in the refurbishment and repair costs/quotes of Aker Solutions tools and equipment
• Be the focal point for all SLS spares sales activities for Reliance

-          Build a relationship with Aker Solutions’ Kakinada Service Base to manage the above

Requirements:

• Technical Degree or similar
• SAP Knowledge

 PROJECT EXECUTIONS DEPARTMENT

OPENING 1

PROJECT PLANNER / SR. PROJECT PLANNER

Responsibilities:

• Prepare project Schedule in primavera accordance the procedures
• Establish, communicate, track and report site installation progress using the principles of Earned Value and Critical Path Management
• Participates in project meetings and revise the schedule as deem necessary and advises the Team about the time impact as a result of actions/deficiencies
• Directs and guides the maintenance work by discussing work orders with operations from backlog.  Scheduling work orders from backlog, to minimize any idle maintenance hours. Follows up on work progress to minimize variation from plan and optimum use of all resources assuring operational success, meeting customer expectations, as well as resolving coordination conflicts
• Works towards producing standard templates for work orders, work plans etc to ensure that time to plan is reduced thus improving the overall effectiveness of the system
• Assist in preparation of formats and compilation of periodic management and/or customer progress reports

Requirements:

·         Degree/Diploma in any field, preferably in Engineering or Science

·         More than 4 years experience in planning or project execution

·         Able to operate primavera version 6 with resource loading

·         Knowledge in SAP is essential

OPENING 2

PROJECT ENGINEER

Responsibilities:

§  Be single point of contact for Project Manager regarding all technical clarifications

§  Work independently under limited supervision to execute technical assignments and tasks

§  Coordinate engineering activities that deal with design, fabrication and testing

§  Evaluate design changes and actively participate in design reviews

§  Hold meetings on “as needed” basis to resolve interfaces and technical clarifications

§  Organize own workload allocation to meet agreed project timelines and budget

§  Ensure interface register is maintained and variations discussed with PM that have Cost/Time impacts

§  Prepare written reports on all activates and testing performed

§  Writing/updating procedures for the engineered solutions and manufacturing processes

§  Involvement in Tender and Budgeting of new projects

§  Train junior personnel

Requirements:

§  Qualified Degree or equivalent in Mechanical, Structural, or Production Engineering

§  At least five years relevant experience in a manufacturing or Oil and Gas background

§  Have working knowledge of oil & gas industry products and technology, including operational exposure to manufacturing processes

§  Strong interpersonal and communications skills, both verbal and written

§  Ability to demonstrate initiative and assertiveness, the ability to plan and manage work in an efficient manner, and the ability to work well under stress and time pressures

§  Working knowledge of Microsoft Suite of programs (Excel, Word, PowerPoint)

§  Willing to travel both short term and long term to satisfy business and projects needs

§  Exposure to SAP preferred but not required

OPENING 3

PROJECT MANAGER

Responsibilities:

• To manage projects in accordance with the company Processes and Procedures
• To work within the Projects Department and provide input to the various stages of sales & bidding, project definition, execution, close out and handover to Service Support
• The project will where possible use the company’s standard products or modified as required. However, elements of the project may be sub-contracted within the Group or with external suppliers
• Project Manager may be required to assist in running new EPC/EPIC & R&D projects locally or globally
• Duties on projects include:-
• Provide management and leadership to Core Project Team (Engineering/Supply Chain/Product Groups/QA/Customer)
• Deliver projects to agreed time scale, budget and to specification
• Commercial & contractual aspects of the project, facilitate changes within contract T&Cs
• Cost management for the project (including financials and cash flow)
• Customer liaison – point of contact to client
• Demonstrate commitment to the company processes, procedures and to of continuous improvement
• Demonstrate commitment to safety throughout Project lifespan
• Provide management and leadership to Core Project Team (Engineering/Supply Chain/Product Groups/QA/Customer)

Requirements:

• HND / Degree in engineering or Project Management
• Experience in running subsea Projects
• Technical knowledge of Subsea equipment 
• Comprehensive Management skills
• Enhanced Commercial and Contractual competence and awareness
• Good team player
• Can do attitude
• Demonstrate a good professional client relationship
• Institute membership preferred

SENIOR PROJECT MANAGER

ESSENTIAL DUTIES & RESPONSIBILITIES

§  Comply to all to HSE requirements.

§  Lead project team in a Matrix organization to accomplish all agreed goals as outlined in Project Charter.

§  Develop plans and budgets to be monitored and controlled through life of project.

§  Be single point of contact for all offsite personnel (Internal and External).

§  Meetings with Management or customers on “as needed” basis to verify status of orders.

§  Train/mentor junior Project Managers with execution efficiency, budget control, and customer relations.

§  Perform reviews and activities in accordance to Aker’s Project Execution Model (PEM).

§  Participate in Work Package reviews to establish optimal delivery solutions.

§  Compile reports to provide single update on project health for Monthly Operating Report (MOR).

§  Evaluate current process and practices to develop and implement improvements through lessons learned.

§  Issuing of Variation or Change orders to clients, as required.

§  Involvement in Tender and Budgeting of new projects.

§  Responsible for invoicing and collection of payments.

QUALIFICATION, EXPERIENCE AND ABILITIES

§  Qualified Degree or equivalent in Engineering (preferred), Finance, Management.

§  At least eight years relevant experience as Project Manager.

§  Have working knowledge of oil & gas industry products and technology, including operational exposure to manufacturing processes.

§  Strong interpersonal and communications skills, both verbal and written. (English).

§  Ability to demonstrate initiative and assertiveness within the organization and to clients.

§  Ability to plan and manage work in an efficient manner while under stress and time pressures.

§  Strong planning background with ability to read and develop schedules.

§  Strong finance background with ability to set and manage budgets (20M+ USD).

§  Experience with structured and document Project review process preferred.

 

PROFILE

§  Team player with the ability to work under own initiative.

§  Target orientated with a, “can do,” attitude.

§  Hands on approach to training and development.

§  Flexible approach to cultural differences.

§  Sound knowledge of how to implement best practices.

§  Excellent communication skills

§  Excellent organisational and planning skills

§  Excellent problem solving ability.

§  Sees challenges as an opportunity for improvement.

§  Strong computer and organizational software skills.

BEHAVIOUR / STYLE

§  Outgoing and persuasive

§  People orientated

§  Assertive achiever

§  Open minded

§  Committed to follow through and persevering

§  Quick thinking and positive attitude

§  Disciplined and hard working

§  Logical approach

§  Committed to excellence

 MANUFACTURING DEPARTMENT - XMT ENGINEERING

OPENING 1

DESIGN ENGINEER - XMT

Responsibilities:

• Provides engineering solutions, performs analysis, mathematical calculations and prepares layouts for detailing
• Implements required changes to resolve field problems and improve product performance and reliability
• Assist in analysis of problem areas and recommends solutions
• Assists with building prototypes and validate through testing (when available)
• Review customer specifications and propose designs to meet those specifications 
• Develop user manuals (rig books) for use by both the customer and the offshore service personnel
• Work with engineers, sales and the Proposal group to decide on what equipment to propose 
• Correspond and interface with engineers overseas and vendors
• Create drawings of equipment to be included in customer proposal
• Reviewing and checking of drawings, including detailed tolerance studies

Requirements:

• 5 + years experience in mechanical, electrical, or hydraulic design of subsea products
• Knowledge and experience with Solid Works software or other 3D software
• Proficient in using AutoCad in generating detail drawings and schematics
• Ability to produce complex technical design layouts and proposals
• Experience with Subsea Trees and/or Controls a benefit
• Familiar with the creation of large equipment proposals is a plus
• Strong interpersonal and communications skills, both verbal and written
• Ability to demonstrate initiative and assertiveness, the ability to plan and manage work in an efficient manner, and the ability to work under pressures

OPENING 2

SOLID WORKS DESIGNER

Responsibilities:

• Reporting to the Drawing Office Supervisor the Solid Work Designer is responsible for generating design layout drawings, models, detail drawings and assembly drawings 
• He/she will ensure that all the required technical specifications and reference material are available; the correct use of part numbers and checks drawings
• He/she will comply with all product engineering draughting standards and procedures of the department
• The Designer will be required to support any other personnel within Engineering as and when required

Requirements:

• Qualified to ONC level or equivalent in Mechanical Engineering and has detail knowledge of AutoCAD and Solidworks draughting packages
• Two years relevant experience in a mechanical engineering background
• Knowledge of Offshore working techniques
• Detailed knowledge of ISO Standards 128, 129 and 1101

§  Involvement with multi-disciplined Projects, and be familiar with both upstream and downstream oil field equipment

SUBSEA SYSTEM DEPARTMENT– TIE IN / STURCTURE / PIPING / ENGINEERING

OPENING 1

PROJECT ENGINEER STRUCTURAL/PIPING, TIE IN, SYSTEM ENGINEER - SUBSEA SYSTEMS

Responsibilities:

§  The Project Engineer is responsible for general tasks within his/her area/. The tasks will be related to the overall system design of subsea developments and coordination between the different products groups involved in the development. The engineer shall when needed assist the staff organization during tender work

§  The Project Engineer shall know the governing documents and regulations for the company. The Project Engineer is responsible for the technical execution of her/his professional area. The Project Engineer is responsible for compliance to regulations for health, environment and safety

• The Project Engineer shall provide Lead Engineer with technical input relevant for procurement department
• The Project Engineer shall have analytical skills in order to verify calculations and analysis
• The Project Engineer can replace Lead Engineer in certain special situations
• The Project Engineer shall participate in Design Reviews within his/her area

Requirements:

• Theoretical: B. Sc. In relevant engineering discipline
• Practical experience: 5 years engineering experience with products for offshore and subsea applications
• Note: Persons not having relevant theoretical qualifications must have minimum 6 years practical experience as described above

 OPENING 2

LEAD/SENIOR ENGINEER - SYSTEM ENGINEERING

Responsibilities:

§  Responsible for co-coordinating progress reporting of deliverables and execution of task related to verifying and implementing the overall System Design and architecture according to client specifications.

§  Responsible for create and review (check and/or approve) all system documentation with the required relevant calculations

§  Budget responsibility for System Engineering scope

• Participate in products’ design reviews

Execution

·         Responsible for development of the following deliverables in a project:

·         MDL (Master Documents List)

·         System design

·         System schematics

·         System analyses

·         MEL (Master equipment list) and top assemblies

·         Mechanical completion system

·         Insulation system

·         Intervention philosophy / ROV access

·         Documentation system

·         Inspection maintenance and repair strategy

·         Technology qualifications strategy

Integration Management

·         To keep an efficient network with all the relevant Project Lead Engineers from each different product within the project

·         Perform engineering management in a project

Scope Management

·         Follow up and manage project’s interface 

·         Participate actively in the technical contract reviews

Quality Management

·         Develop the project design review program

People and Team management

·         Develop and ensure proper facilitation of the project’s technical  training programs

Procurement Management

·         Develop in coordination with procurement the material selection philosophy

HSE Management

·         Provide input to HSE design and reliability

Requirements:

§  MSc/BSc. in preferably Mechanical-, Marine-, Control- or Cybernetics Engineering or/and 3-5 years of relevant subsea’s product area engineering experience

§  Familiar with engineering, procurement and manufacturing systems, practices and processes

§  Good communication skills and leadership skills

§  Good knowledge of the English language

§  Practical, systematic and analytical

§  High integrity and ethical values

§  Flexibility on travelling required according to the project’s needs

• Preferably an Aker Solutions employee

OPENING 3

ENGINEER - SYSTEM ENGINEERING

Responsibilities:

• The tasks will be related to the overall system design of subsea developments and coordination between the different products groups involved in the development. The engineer shall when needed assist the staff organization during tender work
• Work Tasks and areas of responsibility:

• Concept design, system design, detail design, calculations and preparations of drawings, equipment lists, etc
• Establish P& ID and Flow diagrams
• Interface management
• Establish and perform project safety studies / analyses
• Establish operational- and user manuals
• Participate in tender work
• Participate in study and concept activities

Requirements:

• Degree in Engineering (MSc/BSc), preferably Mechanical-, Marine-, Control- or Cybernetics engineering
• Solid background from engineering, design, construction, fabrication and operation of subsea or offshore oil & gas production systems
• 1 to 3 years engineering experience from subsea or offshore projects
• Testing and operational experience
• Ability to demonstrate initiative and assertiveness, ability to plan and organize work in an efficient manner
• Recently graduated engineers are welcome to apply

OPENING 4

LEAD/SENIOR MATERIAL ENGINEER

Responsibilities:

§  To be the single point of contact on all materials issues across the project.

§  Shall establish, describe, implement and maintain the overall Materials and Insulation strategy for the project.

• Responsible for planning, coordination, support and follow-up of Material activities within the project.

Execution

§  Ensure that all materials selected are in accordance with client requirements and based upon the Material Selection Philosophy.

§  Define strategies with respect to corrosion protection.

§  Assist when project raise deviation and clarifications to client.

Scope Management

§  Be the projects expert on contractual requirements for materials.

§  Write and/or update the Material Selection Philosophy, based upon governing standards, the design basis, process requirements and life cycle costs.

§  Write and/or update the Insulation Philosophy (if required)

§  Based upon contract and client requirements provide other relevant documents for the material discipline.

Time Management

§  Control that all material documentation are according to client expectation in due time.

Quality Management

§  Ensure that materials selected meet project requirements and at a minimum the governing standards in the industry.

§  Report to project management if deviations are found in the project.

Communication Management

§  Report to the Project Management any deviations and risk related matters on materials.

§  Participate in technical meetings with work packages, customer and external contractors within the material discipline.

Procurement Management

§  Cooperate with project procurement to ensure that suppliers are aware of any project specific contractual materials requirements.

Requirements:

§  M.Sc. or other relevant experience related to Materials Science and Technology.

§  3 years experience with products for offshore and subsea applications.

§  Good skills in MS Office and SAP.

§  Good communication skills and good knowledge of the English language.

§  High integrity and ethical values.

• Flexibility on travelling required according to the project’s needs

OPENING 5

LEAD ENGINEER – SUBSEA STRUCTURES AND/OR TIE-IN

Responsibilities:

• The position involves responsibility for all engineering within the Work Package

• Responsible for the engineering function and engineering method
• Plan and execute all engineering activities according to PEM
• Administrate analyses and detail verifications
• Responsible for all design, fabrication and testing documentation
• Give technical support to procurement, subcontractors and fabricators
• Participate in testing activities
• The position involves extensive engineering and personnel responsibility within the department
• Participate in studies and tender activities, giving technical and commercial input
• Responsible for maintaining and updating all engineering related procedures and documents
• Responsible to maintain and develop the staff competence within the engineering group
• Responsible to follow up HSE related matters within the engineering group

Requirements:

• MSc or equivalent degree in Engineering within Mechanical, Structural, Civil, Marine or Naval Architecture
• 4 to 7 years engineering experience, preferably  from subsea or offshore design and fabrication
• Experience as group lead (plan and management of engineering group)
• Strong design and engineering skills
• Ability to work in teams
• Good communications skills, (English) both verbal and written
• Systematic, independent and proactive

OPENING 6

SENIOR ENGINEER – Subsea Structures/Manifolds & Tie In - SUBSEA SYSTEMS

Responsibilities:

• Perform analysis and detailed calculations (Structures & Tie-in)
• Prepare design-, fabrication and testing documentation
• Give technical support to subcontractors and fabricators
• Participate in testing activities
• Participate in studies and tender activities, giving technical and commercial input

Requirements:

• MSc or equivalent degree in Engineering within Mechanical, Structural or Naval Architecture
• 3 to 5 years engineering experience, preferably  from subsea or offshore design and fabrication
• Strong design and engineering skills
• Ability to work in teams
• Good communications skills, both verbal and written

OPENING 7

ENGINEER – SUBSEA STRUCTURES AND MANIFOLD - SUBSEA SYSTEMS

Responsibilities:

• Perform analysis and detail calculations (Structures & Tie-in)
• Prepare design-, fabrication and testing documentation
• Give technical support to subcontractors and fabricators
• Participate in testing activities

Requirements:

• MSc or equivalent degree in Engineering within Mechanical, Structural or Naval Architecture
• 1 to 4 years engineering experience, preferably  from subsea or offshore design and fabrication
• Strong design and engineering skills
• Ability to work in teams
• Good communications skills, both verbal and written
• Good English knowledge

OPENING 8

PIPING LEAD ENGINEER (PROJECT POSITION) – SUBSEA TIE-IN AND STRUCTURES

Responsibilities:

• Responsible for the Piping engineering function and engineering method
• Plan and execute all Piping engineering activities according to PEM
• Administrate piping analyses and piping detail verifications
• Responsible for all piping design, fabrication and testing documentation
• Give technical support to procurement, subcontractors and fabricators
• Participate in testing activities
• The position involves extensive engineering and personnel responsibility within the department
• Participate in studies and tender activities, giving technical and commercial input
• Responsible for maintaining and updating all Piping engineering related procedures and documents
• Responsible to maintain and develop the staff competence within the Piping engineering group
• Responsible to follow up HSE related matters within the Piping engineering group

Requirements:

• MSc or equivalent  degree in Engineering within Mechanical or Piping
• 4 to 7 years engineering experience, preferably from subsea or offshore design and fabrication
• Experience as group lead (plan and management of piping engineering group)
• Strong design and engineering skills
• Ability to work in teams
• Good English knowledge, verbally and written
• Good communications skills, (English) both verbal and written
• Systematic, independent and proactive

OPENING 9

SENIOR PIPING ENGINEER – SUBSEA STRUCTURES AND MANIFOLDS - SUBSEA SYSTEMS

Responsibilities:

• Develop piping systems and prepare piping documentation
• Procurement of valves and piping
• Prepare design-, fabrication and testing documentation
• Technical follow-up of subcontractors and fabricators
• Participate in studies and tender activities, giving technical and commercial input

Requirements:

• MSc or equivalent  degree in Engineering within Mechanical or Piping
• 3 to 5 years engineering experience, preferably from offshore design and fabrication
• Strong design and engineering skills
• Ability to work in teams
• Good English knowledge, verbally and written
• Good communications skills, both verbal and written

OPENING 10

PIPING ENGINEER – SUBSEA STRUCTURES AND MANIFOLDS - SUBSEA SYSTEMS

Responsibilities:

• Develop piping systems and prepare piping documentation
• Perform pipe stress analysis
• Prepare design-, fabrication and testing documentation

Requirements:

• MSc or equivalent  degree in Engineering within Mechanical or Piping
• 1 to 4 years engineering experience, preferably from piping stress analysis
• Good knowledge of piping design codes
• Strong design and engineering skills
• Ability to work in teams
• Good English knowledge, verbally and written
• Good communications skills, both verbal and written

OPENING 11

LEAD DESIGNER (PROJECT POSITION) - SUBSEA STRUCTURES/PIPING AND MANIFOLDS, TIE IN, SYSTEMS ENGINEERING

Responsibilities:

·         The position involves responsibility for all design engineering (3D-modelling and drawing production) within the Work Package.

·         Design responsibility within the Work Package.

·         Plan and execute all Design activities according to PEM.

·         Prepare document list (MDL) for drawings.

·         Confirm that layout and functionality of the product is according to project requirements.

·         Handle internal interfaces with respect to layout and access for operational tasks.

·         Manage clash check routines towards relevant envelopes.

·         Participate in Design reviews (internal and external)

·         Delegate work to Design Engineers within the work package.

• Responsible for maintaining and updating all Design engineering related procedures (PEM, SolidWorks and SAP)

Requirements:

• Degree in Engineering
• 4 to 7 years engineering experience, preferably  from subsea or offshore design and fabrication

·         Good communication skills

·         Good English knowledge

·         Good technical educational background

·         Good knowledge of the CAD tool used (SolidWorks, SAP).

·         Sound and long time experience with the given products.

OPENING 12

SENIOR DESIGNER (Project Position) - SUBSEA STRUCTURES/PIPING AND MANIFOLDS, TIE IN, SYSTEMS ENGINEERING

Responsibilities:

• Design of subsea protection structures, templates, manifolds and Tie-in & Tooling
• Prepare fabrication documents and drawings
• Give technical support to fabricators
• Participate in testing activities
• Participate in concept studies and develop new products and technical solutions

Requirements:

• Degree in Engineering
• 3 to 5 years experience from mechanical or offshore industry using 3D CAD (preferably SolidWorks)
• Strong design and engineering skills
• Ability to work in teams as well as independently
• Good english knowledge
• Good communications skills

OPENING 13

DESIGNER - SUBSEA STRUCTURES/PIPING AND MANIFOLDS, TIE IN, SYSTEMS ENGINEERING

Responsibilities:

• Design of subsea protection structures, templates, manifolds and Tie-in and Tooling system
• Prepare fabrication documents and drawings
• Give technical support to fabricators
• Participate in testing activities

Requirements:

• Degree in Engineering
• 1 to 5 years experience from mechanical or offshore using 3D CAD (preferably SolidWorks) 
• Strong design and engineering skills
• Ability to work in teams as well as independently
• Good communications skills
• Good english knowledge

OPENING 14

MANAGER STRUCTURAL/PIPING, TIE IN, SYSTEM ENGINEER - SUBSEA SYSTEMS

Responsibilities:

§  The Manager is responsible for execution of all engineering required for system design, fabrication, testing, load out, transportation, installation/installation supervision and commissioning for the scope of Work for Project. The Manager is then overall responsible for all the engineering deliverables from a project

§  The Manager is authorised to take and implement decisions necessary to ensure efficient performance of all engineering activities, in accordance with the Project objectives. This includes:

·         Budget control for engineering tasks

·         Follow up of progress for all engineering tasks

·         Manpower mobilisation of the engineering team

·         Commit the project to technical solutions in meetings with internal parties, external contractors and the client

·         Develop and maintain the engineering part of the Project such that the requirements of the contract are met in accordance with the Peoject Schedule nd the Manpower Plans

·         Ensure that all standards and codes called for by the contract are available for the relevant project personnel and that any changes are reviewed

·         Ensure that all alterations, modifications or changes, which may have a financial impact, are immediately highlighted and brought to the attention of the Cost Controller/Business Manager in the project

·         Ensure compliance with the requirements of the QA and HES System including legislation, with respect to all duties and responsibilities

·         Follow PEM principles for execution and execute PEM for Engineering Manger

Requirements:

• Theoretical: M. Sc. In relevant engineering discipline
• Practical experience: 10 years engineering experience with products for offshore and subsea applications
• Excellent English Knowledge